Have a question ? Call: (916) 381-2222 or Email: sales@abejan.com

BOB B-750230V | BOBRICK AirCraft® ADA Recessed Hand Dryer
Bobrick AirCraft® ADA Recessed Hand Dryer: shall have a one-piece, cast-iron cover finished in high-gloss, acid-resistant, multicoat vitreous enamel.
- Cover shall project no more than 4" (100mm) from wall to comply with barrier-free accessibility guidelines (including ADAAG in the U.S.A.).
- Cover shall be equipped with a two-position, self-returning, chrome-plated, vandal-resistant air-outlet nozzle that adjusts for hand and face drying and automatically returns to hand-drying position after face drying; prevents vandals from pouring liquids into dryer.
- Cover shall have no exposed air-inlet grille.
- One-piece cast aluminum base shall incorporate concealed, vandal-resistant air-inlet vanes on both sides and bottom.
- Motor shall be 1/10 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end; equipped with automatic thermaloverload switch.
- Heating element shall be located on inlet side of fan, shall heat air without hot spots, be inaccessible to vandals, and protected by an automatic thermal-overload switch.
- Electronic sensor shall automatically turn dryer on when hands or self-returning nozzle are held under air-outlet opening and across path of sensor.
- Dryer will turn off automatically when hands are removed or self-returning nozzle is released.
- Sensor shall automatically shut dryer off approximately 1-1/2 minutes after dryer turns on if an inanimate object is placed across air-outlet opening.
- After inanimate object is removed, electronic sensor shall automatically reset itself and dryer shall operate normally.
- Unit shall be cULus Listed, VDE approved, CE marked.
- Unit shall comply with EU Directive "Restriction of Hazardous Substance" (ROHS) requirements for non-use of certain hazardous substances in the production of electronic products.
- Unit shall be protected by a limited 10-year warranty on all parts except motor brushes.
- Motor brushes shall be warranted for three years from date of purchase.
- Automatic sensor, 208–240V AC, 9–10 Amp, 1900–2400 Watts, 50/60 Hz, cULus Listed, VDE approved, CE marked and CCC approved.

Operation:
Cover projects no more then 4" (100mm) from wall, to comply with barrier-free accessibility guidelines (including ADAAG in the U.S.A.). No-touch Operation: electronic sensor automatically turns dryer on when hands or self-returning nozzle are held under air-outlet opening and across path of sensor. Two-position nozzle is adjustable to direct airflow: up position directs airflow down for hand drying and down position directs airflow up for face drying.

After drying face, release nozzle and it automatically returns to up position. Remove hands or release self-returning nozzle from path of sensor and dryer stops.
Dryer will not stop by itself before user is satisfied hands or face are dry. Dryer operates only when actually drying hands or face, which saves energy and operating costs. Electronic sensor will automatically shut dryer off 1-1/2 minutes after dryer turns on if inanimate object, such as tape or chewing gum, is placed across air-outlet opening. After inanimate object is removed, electronic sensor
automatically resets itself and dryer operates normally.