Have a question ? Call: 
(916) 381-2222 or Email: sales@abejan.com
You're here :
Home 
Dispensers - Paper Products Dispensers - Bath Tissue Standard Roll BOBRICK Recessed Toilet Tissue Dispenser - Model B-6997, Satin Finish
Dispensers - Paper Products Dispensers - Bath Tissue Standard Roll BOBRICK Recessed Toilet Tissue Dispenser - Model B-6997, Satin Finish
BOBRICK Recessed Toilet Tissue Dispenser - Model B-6997, Satin Finish
Item #: BOB B-6997 By ( BOBRICK )
Item #: BOB B-6997 By ( BOBRICK )
BOB B-6997 | BOBRICK Recessed Toilet Tissue Dispenser
Bobrick Recessed Toilet Tissue Dispensers: shall be type-304 stainless steel with Satin finish.
- Shell and flange shall be drawn and beveled, one-piece, seamless construction.
- Unit shall be equipped with 18?gauge (1.2mm) hoods hinged to shell and furnished with plated-steel mounting clamp for Installation in stud walls or countertop aprons.
- *Spindles shall be chrome-plated plastic with heavy-duty internal springs.
- Manufacturer's service and parts manual shall be provided to the building owner/manager upon request.
- Spindles hold rolls up to 5 1?8" (130mm) diameter (1500 sheets).
- Double roll model measures 12 5?16" W x 6 1?8" H .
- Mounting: clamps for securing to stud walls or countertop aprons.
- Rough Wall Openings: 11 3/4" W x 5 1?4" H x 3 3?8" min. depth.
- With stainless steel hoods.
Installation:
Provide framed rough opening 11-3/4" wide x 5-1/4" high (300 x 135mm). Minimum recessed depth required from finish face of wall or apron is 3-3/8" (86mm).
For Installation in stud walls or countertop aprons without backing, loosely attach mounting clamp to back of unit with mounting screws. Insert into rough opening.
Adjust mounting clamp so it grips surface inside rough opening. Secure in place by tightening four mounting screws.
For Installation in stud walls or countertop aprons with backing, discard mounting clamp furnished with unit. Insert unit only into rough opening and secure with sheet-metal screws furnished. Backing must comply with local building codes.
Bobrick Recessed Toilet Tissue Dispensers: shall be type-304 stainless steel with Satin finish.
- Shell and flange shall be drawn and beveled, one-piece, seamless construction.
- Unit shall be equipped with 18?gauge (1.2mm) hoods hinged to shell and furnished with plated-steel mounting clamp for Installation in stud walls or countertop aprons.
- *Spindles shall be chrome-plated plastic with heavy-duty internal springs.
- Manufacturer's service and parts manual shall be provided to the building owner/manager upon request.
- Spindles hold rolls up to 5 1?8" (130mm) diameter (1500 sheets).
- Double roll model measures 12 5?16" W x 6 1?8" H .
- Mounting: clamps for securing to stud walls or countertop aprons.
- Rough Wall Openings: 11 3/4" W x 5 1?4" H x 3 3?8" min. depth.
- With stainless steel hoods.
Installation:
Provide framed rough opening 11-3/4" wide x 5-1/4" high (300 x 135mm). Minimum recessed depth required from finish face of wall or apron is 3-3/8" (86mm).
For Installation in stud walls or countertop aprons without backing, loosely attach mounting clamp to back of unit with mounting screws. Insert into rough opening.
Adjust mounting clamp so it grips surface inside rough opening. Secure in place by tightening four mounting screws.
For Installation in stud walls or countertop aprons with backing, discard mounting clamp furnished with unit. Insert unit only into rough opening and secure with sheet-metal screws furnished. Backing must comply with local building codes.
Item Number: BOB B-6997- BOBRICK Toilet Tissue Dispenser, Hoods, 2 Rolls, Mounting Clamp- Satin Finish
- Model B-6997, Satin Finish
Shipping Weight per Each : 2.48 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
|
|
( See all AbeJan products by BOBRICK ) |
Product Categories
Manufacturers List
Copyright © AbeJan Co. All Rights Reserved.
Developed by Terawebsite.com