Have a question ? Call: (916) 381-2222 or Email: sales@abejan.com

ASI 0692-818 | ASI Surface Mounted Shelf
American Specialty Surface Mounted Shelf: shall be fabricated of alloy 18-8 stainless steel, type 304. Brackets shall be 16 gauge and shelf shall be 18 gauge, with a 1/2" (13) lip on all four (4) sides.
- Front lip shall be hemmed under for safety.
- All exposed surfaces shall be No 4 satin finish and shall be protected during shipment with PVC film easily removable after installation.
- Structural assembly of shelf and bracket supports shall be of welded construction.
- Shelf shall be sized and brackets located as per standard schedule or shall be custom fabricated to customer supplied drawing.
- Scheduled shelves equal to or less than 8" (203) deep shall have standard 4" (102) high brackets and shelves in the depth range greater than 8" (203) to 12" (305) shall have 6" (152) high brackets.
- Consult factory for shelves deeper than 12" (305).
- 8" D X 18" L

Installation:
Unit is surface mounted on wall or partition using No 10 (M5) self-tapping screws or other appropriate fasteners (by others) through holes provided in support brackets. Ensure that adequate in wall blocking or other reinforcement is provided (by others) to support shelf and intended loading weight.
For compliance with ADA Accessibility Guidelines unit should be installed so that shelf top is between 48" (1219) maximum above finished floor (AFF) and 32" (813) minimum AFF. Typical for general utility is 42" (1067) AFF or 18" (457) above washbasin.

Operation:
Shelf is stable and stationary after proper and secure mounting to adequate wall reinforcement or stud structure. Shelf is suitable for wet (self-contained) or dry materials storage.