Have a question ? Call: (916) 381-2222 or Email: sales@abejan.com
You're here :
ASI Profile Collection Surface Mounted Toilet Seat Cover Dispenser - 15 3/4" x 11 1/2" x 2 5/8"
Item #: ASI 9477-SM By ( American Specialty INC )
Item #: ASI 9477-SM By ( American Specialty INC )
ASI 9477-SM | ASI Profile Collection Surface Mounted Toilet Seat Cover Dispenser
es shall have No 4 satin finish protected during shipment with a plastic PVC film which shall be easily removable after installation.
- Vertical edges shall be 3/4?? (19mm) rounded.
- All four corners are welded and ground smooth with no open miters.
- Cover dispensing slot shall have a fully deburred flat edge for snag-free dispensing and user safety.
- Structural assembly shall be of welded construction.
- Wall Opening: 15 3/4" x 11 1/2" x 2 5/8"
Installation:
Unit is surface mounted in wall or partition using two (2) No10 self tapping screws (by others). Mounting holes are hidden behind dispenser box for vandal resistant locking but clearly accessible through dispenser slot for installation. For compliance with ADA Accessibility Guidelines, unit should be installed so that dispenser slot is 54??(1372mm) maximum above finished floor (AFF) if clear floor side reach access is provided or 48?? (1219mm) maximum AFF if clear floor forward reach access only is provided or 46?? (1168mm) maximum AFF if side reach over an obstruction is only provided (i.e. water closet)
Operation:
Covers are self-feeding until supply is depleted. Unit is manually reloaded with a full box through access door on schedule determined by maintenance requirements.
es shall have No 4 satin finish protected during shipment with a plastic PVC film which shall be easily removable after installation.
- Vertical edges shall be 3/4?? (19mm) rounded.
- All four corners are welded and ground smooth with no open miters.
- Cover dispensing slot shall have a fully deburred flat edge for snag-free dispensing and user safety.
- Structural assembly shall be of welded construction.
- Wall Opening: 15 3/4" x 11 1/2" x 2 5/8"
Installation:
Unit is surface mounted in wall or partition using two (2) No10 self tapping screws (by others). Mounting holes are hidden behind dispenser box for vandal resistant locking but clearly accessible through dispenser slot for installation. For compliance with ADA Accessibility Guidelines, unit should be installed so that dispenser slot is 54??(1372mm) maximum above finished floor (AFF) if clear floor side reach access is provided or 48?? (1219mm) maximum AFF if clear floor forward reach access only is provided or 46?? (1168mm) maximum AFF if side reach over an obstruction is only provided (i.e. water closet)
Operation:
Covers are self-feeding until supply is depleted. Unit is manually reloaded with a full box through access door on schedule determined by maintenance requirements.
- Item Number: ASI 9477-SM
- ASI Toilet Seat Cover Dispenser -Surface Mounted
- 15 3/4" x 11 1/2" x 2 5/8"
Shipping Weight per Each : 11.00 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
|
( See all AbeJan products by American Specialty INC ) |
BOBRICK Stainless Steel Dispenser -
Only: $95.70 |
WINDSOFT Multi-Fold Towels - 250 Towels per Pack
|
WINDSOFT Single-Fold Towels - 250 Towels per Pack
Only: $44.96 |
WINDSOFT Multi-Fold Towels - 250 Towels per Pack
|
GEORGIA-PACIFIC Envision® Singlefold Paper Towels
Only: $66.53 |
WINDOWS* Series-i Personal Seats Toilet Seat Cove
Only: $55.46 |
GEN Single-Fold Paper Towels - Kraft
Only: $55.22 |
Kimberly-Clark® KLEENEX® SCOTTFOLD* Towels -
Only: $111.30 |
Copyright © AbeJan Co. All Rights Reserved.
Developed by Terawebsite.com